Phone:  (800) 756-6656 
Fax:      (800) 374-2329 

 

Lodelok Hooks


  • Large eye design for use with the correct size of Grade 80 and 100 chain, wire rope and synthetic material

  • Engineered load bearing surface reduces bearing presure

  • Factory replaceable pins

  • High cycling, long life spring used in release latch.

  • Forged, positive interlocking nose latch fully engages tip of hook.

  • Latch designed to work with gloved hand, pinch points designed out

  • Finger grip pads forged into body of hook

  • I-Beam construction for greater strength/weight ratio

  • Super size of bowl allows a generous load bearing surface to accept today's larger synthetic sling.

  • Forged alloy steel, quenched and tempered

  • Meets ASTM A952/ A952M-02 Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

  • No catch points to snag lines up or down

  • Individually proof tested to 2 times WLL. Certification available upon request.

  • Sizes available 9/32" to 5/8"

  • Engineered flat in the hook's eye

  • Passes 20,000 cycles fatigue test
Click Here to view Metric Chart

SIZE

Hammerlok Size (in)

Dimensions (in)

A

B

C

D

E

F
(min)

G

H

J

9/32

2.00

1.31

5.43

1.00

3.89

1.56

1.47

0.63

1.19

3/8

2.50

1.78

7.41

1.25

5.03

2.25

2.00

0.75

1.25

1/2

3.44

2.38

9.38

1.75

6.68

2.81

2.59

1.00

1.63

5/8

3.94

2.62

10.71

2.00

8.04

3.12

2.92

1.25

1.88

 

Hammerlok Size (in)

Asmb
Part #

Replace
Latch Kit Part#

Max
WLL

4:1
(lbs)

Max
WLL

5:1
(lbs)

Proof Load

(lbs)

Minimum Break
(lbs)

Approx

Weight
(lbs)

9/32

626005

656005

4,300

3,440

8,600

17,200

2.6

3/8

626010

656010

8,800

7,040

17,600

35,200

4.9

1/2

626015

656015

15,000

12,000

30,000

60,000

10.4

5/8

626020

656020

22,600

18,080

45,200

90,400

16.5

 

 
WARNING
  • Do not apply load unless latch and hook are completely closed and locked.
  • Make certain that the latch does not support any part of the load.
  • When lifting, make certain that the load is firmly seated in the base (bowl) of the hook.
  • Inspect hook and latch periodically. If the hook or latch is damaged or if the latch fails to interlock with the tip, the hook should be removed from service.
  • Do not exceed the working load limit.
  • Do not use if the hook is visibly distorted, damaged or worn.
  • Keep body and other objects clear of the latch when closing to avoid the pinch point.
  • Do not side load or tip load hook.
  • User should be properly trained and understand safe rigging practices.

Click On The Respective Links To View More Details
Click On The Respective Links To View More Details